Melis YURDDAŞKAL

Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Konstrüksiyon Ve İmalat Anabilim Dalı

Research areas: Biomaterials, Other, Plating, Composites, Material, Mechanical Properties, Metallic materials, Nanomaterials, Engineering and Technology

Publications

• Graphene-Based Photocatalysts for Biomedical Applications (2024)
• Fe-Cr-C-V hardfacing coatings with molybdenum addition: Wear, corrosion, and cavitation performances (2024)
• Effect of solutionizing and quenching treatment on Ti6Al4V alloy: a study on wear, cavitation erosion and corrosion resistance (2023)
• Demir Esaslı Sert Dolgu Kaplamaların Karakterizasyonu ve Kırılma Tokluğunun İncelenmesi (2023)
• Thermoelectric Films for Electricity Generation (2021)
• The effects of acid concentration, etching temperature and time on the surface morphologies of Ti6Al4V (2020)
• An investigation into the wear behavior of agedAlumix321/SiC composites fabricated by hot pressing - Investigación sobre el comportamiento al desgaste de los compuestos Alumix321/SiC envejecidos y fabricados por prensado en caliente (2019)
• An investigation into the wear behavior of aged Alumix321/SiC composites fabricated by hot pressing (2019)
• Ferromolibden ve Ferrobor Takviyeli Lazer Kaplamaların Aşınma Karakteristiği ve Mikroyapısı (2019)
• Ferromolibden ve ferrobor takviyeli lazer kaplamaların aşınma karakteristiği ve mikroyapısı (2019)
• SOLID STATE RECYCLING: MICROSTRUCTURE AND WEAR PROPERTIES OF HOT PRESSED AA7075 /Al2O3 COMPOSITES (2018)
• Mechanical Properties of AA7075-AA5754 Dissimilar Joints Produced with Cold Metal Transfer Welding (2018)
• CHANGE OF CORROSION BEHAVIOR OF HOT PRESSED ALUMIX321 / SIC COMPOSITES DEPENDING ON THE SIC AMOUNT (2018)
• The effect of acid etching temperature on the surface properties of Ti6Al4V (2018)
• Microstructure and ball-on- disc wear properties of laser-clad FeB coatings on low carbon steel material (2018)
• A Study on FeMo Hardfacing Coatings: Wear Characteristics and Microstructure (2018)
• WEAR PERFORMANCE OF THE WC-Ni COMPOSITE HARDFACING COATING (2018)
• The Effects Of Abrasion Resistance Of The Two-Pass Hardfacing Of Different Chemical Content Wire (2018)
• The Effect of T6 Treating on Wear Resistance of Alumix 321 / SiC Composite Materials Produced by Hot Pressing (2018)
• SHORT OVERVIEW OF HOT ROLLED UPN 160 PROFILES: MICROSTRUCTURE AND MECHANICAL PROPERTIES (2018)
• A COMPERATIVE STUDY ABOUT THE Fe-C-Cr AND Fe-Cr-C-B BASED FLUX CORED WIRES USED IN HARDFACING (2018)
• Mechanical properties of AA7075-AA5754 dissimilar joints produced with cold metal transfer welding (2018)
• SOLID STATE RECYCLING: MICROSTRUCTURE AND WEAR PROPERTIES OF HOT PRESSED AA7075 /Al2O3 COMPOSITES (2018)
• CHANGE OF CORROSION BEHAVIOR OF HOT PRESSED ALUMIX321 / SIC COMPOSITES DEPENDING ON THE SIC AMOUNT (2018)
• Microstructure and ball-on- disc wear properties of laser-clad FeB coatings on low carbon steel material (2018)
• A Study on FeMo Hardfacing Coatings: Wear Characteristics and Microstructure (2018)
• WEAR PERFORMANCE OF THE WC-Ni COMPOSITE HARDFACING COATING (2018)
• The Effects Of Abrasion Resistance Of The Two-Pass Hardfacing Of Different Chemical Content Wire (2018)
• The Effect of T6 Treating on Wear Resistance of Alumix 321 / SiC Composite Materials Produced by Hot Pressing (2018)
• SHORT OVERVIEW OF HOT ROLLED UPN 160 PROFILES: MICROSTRUCTURE AND MECHANICAL PROPERTIES (2018)
• A COMPERATIVE STUDY ABOUT THE Fe-C-Cr AND Fe-Cr-C-B BASED FLUX CORED WIRES USED IN HARDFACING (2018)
• Enhanced photocatalytic properties of Sn-doped ZnO nanoparticles by flame spray pyrolysis under UV light irradiation (2018)
• Effect of annealing temperatures on the crystallization and photocatalytic activity of micro-nanoporous TiO2 films produced by electrochemical anodization (2018)
• Effects of Zn-doping on the photocatalytic activity and microstructures of nanocrystalline SnO2 powders (2018)
• The effect of foam properties on vibration response of curved sandwich composite panels (2018)
• Wear performance of Fe-Cr-C-B hardfacing coatings: Dry sand/rubber wheel test and ball-on-disc test (2018)
• Farklı Kimyasal İçeriğe Sahip Tellerin İki Pasolu Sert Dolgulu Malzemelerin Aşınma Davranışına Etkileri (2018)
• Wear performance of Fe-Cr-C-B hardfacing coatings: Dry sand/rubber wheel test and ball-on-disc test (2018)
• Farklı Kimyasal İçeriğe Sahip Tellerin İki Pasolu Sert Dolgulu Malzemelerin Aşınma Davranışına Etkileri (2018)
• Enhanced Photocatalytic Properties of Sn-Doped ZnO Nanoparticles by Flame Spray Pyrolysis under UV Light Irradiatıon (2017)
• Effects of Zn-Doping on the Photocatalytic Activity and Microstructures of Nanocrystalline SnO2 Powders (2017)
• Determining the Wear Resistance of Fe-Cr-C-B Hardfacing Coating by Ball-on-Disc Testing (2017)
• The Influence of Boron on Microstructure and Hardness OF Fe-Cr-C Hardfacing Coatings (2017)
• Effect Of Annealing Temperatures On The The Crystallization And Photocatalytic Activity Of Micro-Nanoporous TiO2 Films Produced By Electrochemical Anodization (2017)
• Effects of Zn-doping on the photocatalytic activity and microstructures of nanocrystalline SnO2 powders (2017)
• Enhanced Photocatalytic Properties Of Sn-Doped ZnO Nanoparticles By Flame Spray Pyrolysis Under Uv Light Irradiation (2017)
• Investigation of Mechanical Properties of Mmcs From Direct Recycled Powders (2017)
• The Effect of Cr/C Ratio on The Wear Resistance of Hardfacing Coatings (2017)
• The Effect of Microstructure on Abrasive Wear Resistance of Hardfacing Deposits (2017)
• Dry Sand/Rubber Wheel Abrasion Test of Hardfacing Coatings Produced with the Addition of FeB and FeCr Powders (2017)
• Alüminyum Geri Dönüşümünün ÇevreVe Enerji Açisindan Önemi (2017)
• Determining the Wear Resistance of Fe-Cr-C-B Hardfacing Coating by Ball-on-Disc Testing (2017)
• The Influence of Boron on Microstructure and Hardness OF Fe-Cr-C Hardfacing Coatings (2017)
• The Effect of Cr/C Ratio on The Wear Resistance of Hardfacing Coatings (2017)
• The Effect of Microstructure on Abrasive Wear Resistance of Hardfacing Deposits (2017)
• Dry Sand/Rubber Wheel Abrasion Test of Hardfacing Coatings Produced with the Addition of FeB and FeCr Powders (2017)
• Alüminyum Geri Dönüşümünün ÇevreVe Enerji Açisindan Önemi (2017)
• Fe-Cr-C-B ESASLI SERT DOLGU KAPLAMALARIN AŞINMADAVRANIŞI (2017)
• Fe-Cr-C-B ESASLI SERT DOLGU KAPLAMALARIN AŞINMADAVRANIŞI (2017)
• Experimental and numerical analysis of vibration frequency in sandwich composites with different radii of curvature (2017)
• THE TEFLON FILM EFFECT ON IMPACT RESPONSE OF SANDWICH COMPOSITE PANELS (2016)
• THE COMPARISION OF LOW VELOCITY IMPACT RESPONSE OF FLAT AND CURVED SANDWICH COMPOSITE PANELS (2016)
• The effect of curvature on the impact response of foam based sandwich composite panels (2016)
• Fabrication and characterization of nanostructured anatase TiO2 films prepared by electrochemical anodization and their photocatalytic properties (2015)

CV