Removal of manganese (II) from aqueous solution by ionic liquid impregnated polymeric sorbent and electrodeionization (EDI) techniques
Makaleler > Tam Makale · 2021
Yazarlar: Gulsev Soysuren, Ayse Gul Yetgin, Özgür ARAR, Müşerref ARDA
Process Safety and Environmental Protection, SCI Expanded İndekslerine Giren Dergi, Uluslararası, Wos, 2021, cilt 158, ss 189-198
DOI: 10.1016/j.psep.2021.11.053
Özet
Manganese is an element that is essential for the proper functioning of humans and animals, as it is needed for the functioning of many cellular enzymes. However, overexposure to this metal can be toxic to many organ systems and at various stages of life. In this work, ionic liquid impregnated polymeric sorbent (ILIS) and electrodeionization (EDI) processes were used to remove manganese (Mn2+) from aqueous solutions. The removal of Mn2+ by ILIS is pH dependent and maximum removal is achieved at pH 9. The sorption of Mn2+ on ILIS reached equilibrium in 20 min. For Mn2+ removal by EDI, the applied potential, feed flow rate and H2SO4 concentration in the electrode compartment were optimized. When the applied potential and feed flow rate were increased, the Mn2+ concentration in the feed solution decreased. Varying the H2SO4 concentration in the electrode compartment did not result in differences in the removal rate. The largest calculated flux for Mn2+ is 6.92 x 10-5 mol/m2s, and the mass transfer coefficient is 8.16 x 10-4 m/s. In the last phase of the experiment, ILIS-EDI hybrid techniques were used for the removal of Mn2+. In this case, more than 99.9% was removed from the solution. (c) 2021 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.