Bazı Lamine Ağaç Malzemelerden Hazırlanmış T-Tipi Birleştirme Elemanlarının Çekme Kuvveti Performanslarının Belirlenmesi
Makaleler > Tam Makale · 2011
Yazarlar: Haci Hasan Efe, Ali Kasal, Selçuk DEMİRCİ, H. Özgür Imirzi, Ertan Özen, Taner Dizel
DergiPark (Istanbul University), Uluslararası, 2011, cilt 11, ss 146-155
DOI: 10.17475/kuofd.56733
Özet
In this study, tension force performance of Ttype furniture joints with laminated veneer lumber prepared from domestic and tropical wood were compared. In the experiments, three different types of laminated veneer lumber created by combining elements of the Ttype, two different frame type, glued mortise and tenon and nonglue dowelminifix two jo ints techniques were used in the test. 120 test samples were performed under static loads subjected to linear tensile tests. The wood material, oak (Quercus petraea liebl.) and mahogany ( Swietenia mahogan ) and limba ( Terminalia superba ) wood were preferred because of their frequent use in the Turkish Furniture Industry. According to the results of the experiment, the highest tensile strength performance were obtained in the loading position of the joints perpendicular to the surface, laminated mahogany gluemortise and tenon joints prepared ingredients, aside from the installation of the vertical position of the joints, oak glued laminated veneer lumber prepared mortise and tenon joints. According to the type of joints, nonglue dowelminifixed fasteners produced the best results in the joints perpendicular to the installation surface with; whereas, tenon glued joints were found to be more successful in the joints perpendicular to the edge loading mortise. . When tensile strength performances of the test samples were examined according to the frame types, the combined elements from the surface were found to be more successful than edgecombining elements.